儀表工程師崗位職責:
1) Responsible for related technical proposal work (Instrument selection, IO List, Load List, Control System Architecture, etc)at the bidding stage;
配合銷售及報價部門完成儀表選型、IO清單、負荷清單、控制系統架構、材料清單估算;
2) Responsible for preparation of material requisition, technical clarification and technical evaluation;
負責編寫詢價文件,主導技術澄清、編制技術協議并完成技術評定;
3) Responsible for IFC drawing design, including specification, instrument layout, cable tray layout, loop diagram, etc;
負責儀表施工圖設計工作(規格書、儀表平面布置圖、橋架布置圖、控制回路圖等);
4) Responsible for E&I 3D modeling via E3D/Plant3D,reviewing all fabrication drawing/documents sub-contracted;
負責電儀3D模型(E3D/Plant3D)及施工設計圖紙/文件的校核;
5) Work with the construction department at site/module yard, providing necessary technical support;
對接現場、模塊廠施工端,完成相關技術支持工作;
任職要求:
1) Bachelor, Engineering degree or equivalent, majored in Electrial Engineering, Automation;
大學本科,工程師學位及以上學歷,電氣工程、自動化專業;
2) Good command in English is must, bilinguals would be a plus;
熟練掌握英文溝通與讀寫,多語種優先;
3) Good command of MS Office, Autocad, MathCAD, Eplan, E3D, etc;
熟練掌握MS Office,Autocad,MathCAD,Eplan, E3D等設計軟件;
4) Above 5 years design experience in Oil & Gas Facilities, Chemical Plant, Refineries, Power Plant construction;
5年以上石油天然氣設施,化工廠,煉油廠,電廠工程設計經驗;
5) Knowledge of relevant IEC, NEC, GB codes with respect to plant design and construction;
理解電氣儀表設計相關的國際和地區標準,如GB,IEC,NEC等;
6) Good communication skills and team work;
良好的溝通技巧和團隊合作精神;
7) Willing to be relocated worldwide, similar overseas working experience would be a plus;
愿意在全球范圍內出差、工作,有類似的海外工作經驗優先;
自控工程師崗位職責:
1.負責精細化工,油氣,新能源鋰電等相關項目DCS系統的工程設計,系統組態和現場調試;
2.在項目中可編制調試方案并完成系統中的FAT&SAT;
3.負責現場客戶培訓,維護指導;
4.能夠與業主和供應商良好交流溝通;
5.部門安排的其他工作。
任職要求:
1. 具有本科以上學歷,電氣,自動化,計算機,儀表等相關專業畢業(
2. 3-5年以上的大型DCS廠家工作經驗,獨立主導過一般中大型自控項目的實施
3.項目經歷具有精細化工和新能源鋰電行業的優先考慮,軟件方面西門子,中控,艾默生等其中至少熟練掌握一種(西門子PCS7優先考慮)
4. 熟悉現場儀表及各種信號與通訊
5. 熟練的使用OFFICE等常用辦公軟件
6. 英文溝通能力強
7. 具有良好的溝通協調能力,主動的學習能力和團隊合作意識
專業要求:專業不限